Falcon FN10K-2TXI, Owner'S Operating Manual

Page: 12 / 50

4.4 UPS Output Ratings
WARNING: If the (50 or 60Hz) constant frequency mode is enabled, the UPS output(s) must be derated by
25%. Please refer to the fixed frequency output mode ratings for your model in the specifications located
at the end of this manual.
FN3K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 1.5KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 1.5KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 3KVA, 208 V
No.4 (Output1 0V L1- Output2 120V L2): 3KVA, 240 V.
Use only #10 AWG, 75C copper wire and torque terminal block screws to 17.7 in-lb.
FN4K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 2KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 2KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 4KVA, 208 V
No.4 (Output1 0V L1- Output2 120V L2): 4KVA, 240 V.
Use only #10 AWG, 75C copper wire and torque terminal block screws to 17.7 in-lb.
FN5K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 2.5KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 2.5KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 5KVA, 208 V
No.4 (Output1 0V L1- Output2 120V L2): 5KVA, 240 V.
Use only #10 AWG, 75C copper wire and torque terminal block screws to 17.7 in-lb.
FN6K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 3KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 3KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 6KVA, 208 V
No.4 (Output1 0V L1- Output2 120V L2): 6KVA, 240 V.
Use only #10 AWG, 75C copper wire and torque terminal block screws to 17.7 in-lb.
FN8K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 4KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 4KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 8KVA, 208 V
No.4 (Output1 0V L1- Output2 120V L2): 8KVA, 240 V.
Use only #8 AWG, 75C copper wire and torque terminal block screws to 23 in-lb.
FN10K-2TXI:
Output Marking: No.1 (Output2 0V L1- Output2 120V L2): 5KVA, 120 V.
No.2 (Output1 0V L1- Output1 120V L2(N)): 5KVA, 120 V.
No.3 (Output1 0V L1- Output2 88V L2): 10KVA, 208 V.
No.4 (Output1 0V L1- Output2 120V L2): 10KVA, 240 V.
Use only #6 AWG, 75C copper wire and torque terminal block screws to 23 in-lb.
12