Page 30
Either patch the tube (Follow the instructions in your patch kit),or use a new tube. Reinstall the tire and tube. Slip one
tyre bead over the rim. Insert the tube valve through its hole in the rim. Feed the tube carefully into the cavity of the tyre.
Inflate the tube just enough to give it some shape. Starting at the valve stem use your thumbs to seat the tire bead inside
the rim. Work your way around both side of the wheel until the entire bead is seated in the rim. Be careful not to pinch the
tube between the tire bead and the wheel rim. If you have trouble getting the last few inched of bead over the edge of the
rim with thumb pressure,use a tyre lever and be careful not to pinch the tube. To avoid punctures we recommend slime
tyre sealant or similar.
CAUTION:
Do not use a screwdriver or any tool other than a tire lever, you will to puncture the tube.
Check to make sure the tire is evenly seated around both sides of the rim and that the tube is inside the tire beads. Push
the valve stem into the tire to make sure that its base is seated within the tyre’s beads. Inflate the tube slowly to the
recommended pressure,all the while checking to make sure that the tire beads stay seated in the rim. Replace the valve
cap,and install the wheel onto the E-Bike.
WARNING:
Riding your E-Bike with a flat or under-inflated tire can damage the tire,tube and E-Bike,and can cause you to
lose control and fall.
Broken Spoke:
A wheel with a loose or broken spoke is much weaker than a fully tensioned wheel.
If you break a spoke while on a ride,you will have to ride home much more lowly and carefully because the weakened
wheel could break additional spokes and become useless.
WARNING:
A broken spoke seriously weakens the wheel and may cause it to wobble,striking the brakes or the frame. Riding with a
broken spoke can cause you to lose control and fall.
SERVICE & MAINTENANCE SCHEDULE
Summary of Contents for FLO
