18
Australia
ArtNo.331-0001Grill pan pulled forwards
Fig.6-5
ArtNo.331-0003 Grill frame out, no pan
ArtNo.331-0004 Removing the grill frame
Fig.6-6
Fig.6-7
ArtNo.331-0005 Removing the grill rail
Fig.6-8
ArtNo.331-0006 Grill pan plan
Fig.6-9
Now fit the two burner caps, ensuring that they are seated
properly.
Check the burner ports are not blocked. If a blockage occurs,
remove stubborn particles using a piece of fuse wire.
The Wok Cradle
Recommended cleaning materials are hot soapy water, a
moistened soap pad, cream cleaner or nylon scourer.
Griddle
Always clean the griddle after use. Allow it to cool completely
before removing. Immerse the griddle plate in hot soapy
water. Use a soft cloth or, for stubborn stains, a nylon washing
up brush.
Never use caustic or abrasive cleaners, as these will
damage the surface.
If the griddle is cleaned in a dishwasher residue may
appear on the underside. This is perfectly safe and
will not affect the cooking surface.
Glide-out Grill
The grill pan and grid should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for a
few minutes immediately after use. Stubborn particles may
be removed from the grid using a nylon brush. Alternatively,
the grill pan can be washed in a dishwasher.
Before you remove any of the grill parts for cleaning,
ensure that they are cool, or use oven gloves.
The grill pan can be easily removed for cleaning as follows.
Remove the grill pan support frame by pulling the grill pan
forward
(Fig.6-5)
.
Lift the grill pan clear of the support frame.
The support frame
is held to the side rails by two clips on each side
(Fig.6-6)
.
For each side, support the side rail with one hand and with
the other hand lift the frame up and out of the side clips
(Fig.6-7)
.
For safety, push the side rails back into the grill chamber.
If you need to remove the side rails to allow cleaning of the
grill chamber, you can unhook them from the grill chamber
sides
(Fig.6-8)
and wipe the sides clean with a soft cloth and
mild detergent.
DO NOT use any abrasive substances.
DO NOT put the side runners in a dishwasher.
Once you have finished, hook the side rails back onto the
sides of the chamber. To refit the frame, pull the side rails
forward and, for each side in turn, support the side rail and
press the frame down into the side rails. Replace the grill pan.
When refitting the grill pan, ensure that the wide rim is at the
front
(Fig.6-9)
.
