Falcon E9241, User, Installation And Servicing Instructions

Page: 30 / 31

25
8.1.4 Perforated base panel
9.0 FAULT FINDING
FAULT POSSIBLE CAUSES REMEDY
Unit will not turn ON No Power to unit Check power supply is
connected & turned ON
Unit will not operate Unit not switched On Turn unit On inside door
Unit will not switch On Element not in base off pan Make sure element in down
position
Safety cutout activated Low water level Add water to pan
Pan overflows Too much water in pan Reduce water level
Pan overflows Too much water in pan Check overflow drain for
blockage
No water at tap Water off at mains Turn water on at mains
Unit will not drain Blocked drain Clean filter at drain in pan