1.4 INSTRUCTION TO USER
Upon completion of installation, the correct method of operation should be demonstrated to
kitchen staff. Location of the main isolating switch should also be indicated, to be used in
event of an emergency or during cleaning.
SECTION 2 - SERVICING and MAINTENANCE
Warning
BEFORE ATTEMPTING TO UNDERTAKE ANY MAINTENANCE TASK. ISOLATE THE
POWER AT THE MAIN SWITCH AND TAKE STEPS TO ENSURE THIS CANNOT BE
INADVERTENTLY SWITCHED ON.
2.1 OVEN CONTROL PANEL
2.1.1 Control Panel
Undo two fixings on underside of oven until location pins allow panel to drop forward.
2.1.2 To Remove Rear Panel
a) Slacken fixings behind elongated slots at top of panel.
b) Lift panel clear of these fixings.
c) Replace in reverse order.
2.1.3 To Remove Outer Casing
a) Remove rear panel. See Sections 2.1.2.
b) Undo fixings that secure casing to base.
c) Remove top and bottom hinge fixing screws.
d) Pull casing sides away from base and lift casing.
e) Replace in reverse order.
2.1.4 To Remove Oven Back Baffle
a) Remove oven shelves.
b) Raise shelf hangers from keyhole slots and remove.
c) Slacken back baffle fixing screws.
d) Raise baffle on keyhole slots to remove.
e) Replace in reverse order.
2.1.5 To Remove Elements
a) Remove back baffle. Refer to Section 2.1.4.
b) Remove rear panel as detailed in Section 2.1.2.
c) Undo element connections at oven rear.
d) Remove fixings at rear of oven cavity.
e) Withdraw element.
f) Replace in reverse order and ensure earth tab is connected.
2.1.6 To Remove Fan
a) Remove baffle. Refer to Section 2.1.4.
b) Remove rear panel. Refer to Section 2.1.2.
c) Undo fan wires.
d) Remove earth lead.