Falcon DOS Portable Data Terminals, Advanced User'S Manual

Page: 96 / 184

Disk Drives, Organization, Software, & Configurations
5-4
Falcon
®
DOS Portable Terminals
Drive B
Drive
B
is a disk image that is located in flash. A read-only drive, it is intended
to be used to store mandatory utilities and initialize the boot process. During
normal use this drive will not be updated.
Drive
B
includes the following files. Where applicable, page numbers tell where
to find more information about specific files.
z autoexec.bat
, the second file in the startup sequence.
z
cfgdev.sys
, the system-parameter-configuration device driver
(
page 6-3
).
z
comio.com
, the utility for redirecting input and output to the serial
port (models 32x , 33x , and 34x only; (
page 6-5
).
z
config.saf
, the second file in the safe-boot sequence.
z config.sys
, the second file in the boot sequence.
z
coreupd.com
, the utility that updates the firmware image.
z decode.sys
, the bar-code-decoding device driver (
page 6-6
).
z
flashdsk.sys
, the resident flash disk device driver (
page 6-7
).
z format.com
, the disk-reformatting utility (
page 6-8
).
z
functest.com
, the functional test for system components.
z himem.sys
, the device driver for accessing extended memory (models
32x , 33x , and 34x only).
z ld.bat
, the batch file for
response.bat
processing.
z
lock.com
, the utility for locking or unlocking the resident flash disk
and RAM disk (
page 6-9
) .
z
organize.com
, the utility for reorganizing flash disk data
(
page 6-10
) .
z
pm.com
, the power-management utility (
page 6-11
) .
z umblink.exe
, the device driver for accessing upper memory blocks
(models 32x , 33x , and 34x only).
z vdisk.sys
, the RAM-disk device driver (
page 6-13
) .
z
xfer.exe
, the serial-transfer utility (
page 6-14
) .
advuser.book Page 4 Friday, September 27, 2002 4:22 PM