Falcon DOS Portable Data Terminals, Advanced User'S Manual

Page: 86 / 184

Using File Transfer Programs
3-34
Falcon
®
DOS Portable Terminals
Error Codes
Table 3-2:
lists error codes returned by XFER.
Table 3-2: XFER Error Codes
XFER Error Codes
Value Mnemonic Description
0 OK All files transferred OK.
1
ABORT_FILESSKIPPED One or more files were skipped during a
multifile download.
2
ABORT_TIMEOUT The transfer was aborted because of a
timeout.
3 ABORT_KEYPRESS The abort key (
<ESC>
) was pressed.
4
ABORT_LINEERROR A communications line error (e.g.,
OVERRUN) occurred.
5
ABORT_FILEERROR A read, write, open, close, or access error
occurred on a file.
6
ABORT_FTPERROR An invalid file-transfer protocol option was
selected.
7 ABORT_CHECKERROR A checksum or CRC error occurred.
8
ABORT_MEMORYERROR An error occurred while trying to allocate
memory from the heap.
9
ABORT_RECEIVERERROR The receiver encountered a problem and
requested to skip the file.
10
ABORT_COMERROR An error occurred while opening the COM
port.
11
ABORT_ARGERROR An error in an argument (option setting)
occurred on the command line.
20 ABORT_UNKNOWN An unknown error occurred.
31
MODEM_ABORT_CONNECTION XFER could not establish a connection
with the remote end.
32 MODEM_ABORT_NORESPONSE The modem did not respond.
33
MODEM_ABORT_INIFILE The specified modem-initialization file
could not be found.
advuser.book Page 34 Friday, September 27, 2002 4:22 PM