Falcon DOS Portable Data Terminals, Advanced User'S Manual, Page: 34 / 184

The Falcon Configuration Utility
2-6
Falcon
®
DOS Portable Terminals
Figure 2-3: The Open Dialog Box for Selecting a Configuration File
4. When the configuration file is finished loading, a second
Open
dialog
box appears.
5. Use this dialog box to select a program-settings file from the
Progsets
folder.
6. The program-settings file contains the information that will be presented
when selecting the
Program Settings
button on the
Custom
Configuration
menu.
7.
After the program-settings file is loaded, the
Custom Configuration
menu appears (
Figure 2-4 on page 2-7
).
File
Configuration
Select this option to choose application files to be loaded into the Falcon. Refer
to
page 2-9
through
page 2-16
for information about the
File Configuration
windows.
Configure Files Using:
This field shows the configuration file that will be used
to specify the files that will be loaded into the Falcon. Select the check box to
load the files. Deselect it to turn this option off.
If the Open as read-only check box is selected and changes are made to the
configuration settings, use a new file name to save the changes.
advuser.book Page 6 Friday, September 27, 2002 4:22 PM