Pips
Notch
Important
Do not allow any spillage or cleaning material debris
enter the large hole in the burner base.
Figure 6
5. Replace burner head and aluminium bezel upon
burner base and ensure the head location pips sit
within burner base notches. When burner head is
properly located, it will not rotate.
Figure 7
6. Light burner to check that it operates correctly.
Note: Ensure that all parts are dried thoroughly prior
to re-lighting.
Note
This process should be followed prior to calling for a
Service Engineer. Failure due to lack of proper
cleaning is not covered by warranty.
