SECTION 1 -
GENERAL DESCRIPTION
The E3405 is a 400mm wide electric chip scuttle.
It is designed to be mounted on a worktop or similar
surface. Alternatively, it can be installed upon a fixed or
mobile stand.
Heating element is controlled by a single switch.
A red neon indicates that power is available (i.e. isolating
switch is on). The amber neon will go out when the set
temperature has been reached.
This unit is designed to accommodate standard
1/1 gastronorm containers
(530mm x 325mm)
with a
maximum depth of 150mm.
Warning - THIS APPLIANCE MUST BE EARTHED
.
SECTION 2 -
CONTROLS and OPERATION
This unit must be installed by a suitably qualified
person.
A mains input connecting cable is supplied. If supply
cable is damaged, it must be replaced by manufacturer,
service agent or similiarly qualified person.
Red neon will light when mains supply is on.
Switch on, amber neon will light.
Allow 15 – 20 minutes heat up time before filling container
with chips.
Switch off after use.
SECTION 3 -
STORING HINTS
The over-pan ceramic element warms the stored chips
while an element heats the container from below.
SECTION 4 -
CLEANING and MAINTENANCE
Switch off electricity supply prior to cleaning.
Allow pan to cool before cleaning.
Clean pan and drip tray with hot, soapy water and a soft
cloth.
NEVER USE a spray jet to clean this appliance.
Red
neon
Amber
neon
