Factory Default Mode:
To return the PSU operating parameters to the factory defaults, remove the
power plug. Press and hold the
Plus
and
Minus
buttons while inserting the power plug. The display
will show:
Release both buttons and the display will show " don" to indicate factory default settings have been
restored. Press and hold the
Stby
button to return to
Standby Mode
.
Factory Default Programming is as follows:
Current Speed:
33.3 RPM
Base Speed Offset 33.3:
0.00
Base Speed Offset 45.0:
0.00
Output Voltage 33.3:
100V
Output Voltage 45.0:
100V
