Falcon DAEDALUS, Manual

Page: 12 / 20

10
When it’s time to change your bobbin, simply slip off the tension and
drive belts, and then lift out the flyer and bobbin assembly. Remove
the rear axle bearing and keep track of it by placing it back onto the
rear magnets until you can get the new bobbin installed. With the new
bobbin on the flyer shaft, replace the rear bearing onto the end of the
axle and place the assembly back onto the chassis, making sure the
small rear bearing goes back onto the magnets. Replace the tension
and drive belts, and you are ready to spin again!
Changing the Bobbin