Falcon 1000 Mercury Dual Fuel, User'S Manual And Installation Instructions, Page: 23 / 36

INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
19
Checking the Parts: You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain must
be fitted.
These are not supplied with the cooker but are
available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10.
Screws for fitting stability bracket
11.
3 mm Allen key
5 pan supports Wok cradle
Grill pan, trivet & cradle 1 drop shelf & 1 flat shelf
1 telescopic shelf Tall oven shelves & supports
ArtNo.000-0010 Tall oven shelves
Oven Base Tray
Bottom panel & mounting
brackets
Flue trim & flue vent Side panels & obscuring trims
Side panel mounting brackets Conversion kit