3.
Next install the sliding vent panels on the inside of the windshield as shown in the diagram below. To
install slide fasteners push through holes with thumbs until it is completely through the hole in the
windshield and locked in place.
4.
Now the Windshield is ready to be installed. With the help of a friend, place the Windshield on the U
Force, setting it up onto the hood.
5.
You are now ready to install the windshield on your roll cage. Place the windshield on the vehicle first.
Then take the six Velcro clamps and place them through the square holes then wrap the strap around the
roll cage and under the wire as shown in the photo below.
