5.
Now install the 16” long 1” wide adhesive Velcro strip down the front of the fender as shown below.
6.
After the Velcro is placed at the bottom of the roll cage and along the fender line attach the front of the
door to place it where it needs to be. This helps to assure that all the remaining Velcro will be at the
correct locations to hang the door right. The photo on the next page shows how the front of the door
should look.
7.
Now move on to wrapping the adhesive Velcro around the roll cage at where each double-sided strip is
sewn to the edge as shown on the first page.
