8.
Once the door is in place install the rear window. The top of the windshield is held in place
by two 8”
Velcro tabs sewn along the edges on both sides of the brake light. Attach the adhesive Velcro strips on
the top bar as shown in the photo below.
9.
Now take the rear window and attach the two 8” tabs to the adhesive Velcro centering the cutout across
the top under the rear brake light. The photo below shows how it should look.
10.
Next attach the four double-sided strips to the roll cage as you did with the door.
11.
Also at this point before you lace the Rear Window to the door you should wrap a 6” strip of adhesive
Velcro to the roll cage a little less than halfway up the rear bar. Then wrap the double-sided strip with
the strap sewn to it around the adhesive strip with the webbing strap facing the top of the vehicle. This
will be for holding the Soft Top in place later. The photo below shows how this should look.
