4
Example: DISARM#1234120
Telephone Control Commands
1.
Dial the number of the premises
If your system is connected to a regular phone line dial the number of the panel
and wait for three rings then hang up. Wait at least five seconds and dial the
number again. On the second ring the control system
answers
and sounds two
tones.
If your system supports cellular communication dial and wait until the system
answers
and two tones are heard.
2.
Within 15 seconds, enter the Telecontrol Code (code 29). After a tone sounds, press:
3:
Full arm
6:
Disarm
7:
Extend the call
9:
Cancel siren
2:
2 Way Audio
430:
PGM on
530:
PGM off
*#:
Disconnect the line
Keyfob
: Full Arm
: Disarm
: Part Arm, PGM
/
: Perimeter Arm, PGM
Connecting to your Web Browser Application
1.
Enter the Web page address supplied by your Web service provider
and press
Go
.
2.
Login page:
a.
User name
and
Password
– Enter values supplied by your
Web service provider.
b.
Passcode
– Enter your
CommPact
user code
3.
Click the
Enter
button
Electronics Line 3000 Ltd. 05/2011
5IN1507 B
