FALCOM MAMBOII, User Manual

Page: 183 / 271

C
ONFIGURATION
C
OMMAND
S
ET
- F
IRMWARE
R
EVISION
2.4.0_
BETA
- V
ERSION
1.0.0
3.2.21 GPRS parameters
All parameters below specify the settings to be used to establish a GPRS connection.
3.2.21.1 GPRS.APN
Parameter syntax GPRS.APN=< value >
This parameter specifies the APN Access Point Name (text string). The APN is logical
name that is used to select the GGSN or the external packet data network. In other
words, the APN name that your network operator has provided to connect the
MAMBOII to the Internet. The APN specifies the external network that a MAMBOII
can access. It also defines the type of IP address to be utilized, security mechanisms
to invoke, available value added services, redundancy, and fixed-end
connections.
< value >
It specifies the Access Point Name (APN). The logical name that is used to select
the GGSN or the external packet data network. Consult your Network Operator
for the correct APN settings).
How to set/get GPRS configuration:
Set configuration
$PFAL,Cnf.Set,GPRS.APN=internet.t-d1.de
Get configuration
$PFAL,Cnf.Get,GPRS.APN
Notes
• If the value is omitted, then it is set to the default value.
3.2.21.2 GPRS.AUTOSTART
Parameter syntax GPRS.AUTOSTART=< value >
It specifies the start-up mode of the GPRS connection .
< value >
It specifies the start-up mode of the GPRS connection. It can be set to:
Value Meaning
0
Disables auto-reconnect.
1
Enables auto-reconnect. The device automatically and
repeatedly attempts to re-establish the connection. The
GSM.GPRS.eConnecting
event raises each time the
device tries to re-establish the connection until it is
attached to the GPRS.
How to set/get GPRS configuration:
Set configuration
$PFAL,Cnf.Set,GPRS.AUTOSTART=1
Get configuration
$PFAL,Cnf.Get,GPRS.AUTOSTART
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 183 of 271