FALCOM FSA03, Getting Started

Page: 13 / 13

G
ETTING
S
TARTED
W
ITH
FSA03-EVALKIT V
ERSION
1.0.1

The current tracking status of on-view satellites is represented by color. Table
below shows the color coding for graphical views.
COLOR DESCRIPTION
RED Satellite signal not available.
BLUE Satellite signal available, not available for use in navigation
CYAN Satellite signal available, available for use in navigation
GREE Satellite used in navigation.

To show the Deviation Map either press F12 or go to the
View
menu and start
"Deviation Map".
The Deviation Map displays positions in longitude and latitude
relative to a defined reference position.
Figure 11 : Deviation Map

To perform a Coldstart , Warmstart , or Hotstart in the receiver, go to the
Receiver
menu,
"Action"
and then start either
Coldstart
,
Warmstart
, or
Hotstart.
ACTION DESCRIPTION
Coldstart Clears all data currently stored inside the FSA03 receiver including position, almanac,
ephemeris.
Warmstart Same functionality as Hot Start except that it clears the ephemeris data and retains all other
data.
Hotstart FSA03 receiver restarts with values stored inside the receiver. The stored ephemeris and
almanac are valid.
For more information about the
u-Center
software, refer to the manual "
u-
Center_User_Guide(GPS-SW-08007).pdf
" located in the
"/..../u-blox"
directory on your hard
drive when the software installation has finished.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 13 of 13