28
Checkpoint
Okay
Not OK Not okay, solution:
Remarks:
Mechanical
Check if all bolts and nuts are firmly tightened and
in place.
Tighten bolts and nuts and replace them if
necessary.
Check the column
for signs of wear and tear,
cracks and deformation.
Put the lift out of use immediately and contact your
Falco-retailer.
Check the lifting arms for signs of wear and tear,
cracks and deformation.
Put the lift out of use immediately , have the broken
parts repaired/replaced immediately by a
professional mechanic, only use original Falco-parts.
Check the rubber pads for signs of wear and tear,
cracks and deformation.
Replace the rubber pads, onl use original Falco
parts.
Check the concrete floor for signs of wear and
tear, cracks and deformation.
Put the lift out of us immediately,
-
Have a professional mechanic assess
the situation.
-
Replace the entire floor if necessary,
refer to chapter 3 of this user manual
for the demands which the concrete
floor has to meet.
Check if the safety locking mechanism for the
lifting body functions appropriately.
Put the lift out of use immediately,
-
Adjust the safety lock so they function
properly.
-
Replace the safety lock if necessary,
only use original Falco parts.
Check if the locking mechanism for the arms
functions properly
-
Adjust the locking position.
-
Replace the toothing and entire lever if
worn, use only original Falco parts
Hydraulic
Check the oil level in the oil tank.
Top up oil level with Falco CH32V Hydraulic oil.
Thoroughly check the entire hydraulic system for
leakages.
Put the lift out of use immediately,
-
Repair leakages.
-
Replace leaking parts, only use original
Falco parts.
Standard periodical maintenance protocol VL25F1