7
INSTALLATION
1.1 The cooker hood should be placed at
a distance of 65-75cm (26-30inch) from
the cooking surface for the best effect.
See Pic 1.
1.2 Up extraction and back extraction
could be choosed.When you choose back
extraction,take down the back outlet
panel and assemble the motor to the
back,put the back outlet panel to the
top.see Pic.2 & 3.
1.3 Install the hook on a suitable place once the installation height is
fixed, and keep it in line.Drill the holes.(The fixed position of the
inside chimney bracket is the place of chimney.)
1.4 Insert raw plugs into all of the holes that you have drilled.Fasten
the 2pcs ST4 * 30 screws in the relevant holes,and use 2pcs ST4 *
40 scrwes to fasten the inside chimney bracket,see Pic 4.
1.5 Fasten the outlet and extension pipe in the hood body.See Pic 5.
1.6 Install the outside chimney bracket on the outside chimney,to
make sure outside chimney is free to stretch,See Pic 6.
1.7 Hang the hood onto the support screws and fasten the screws.See
Pic 7.
1.8 Pull the inside chimney out and install it on inside chimney
bracket,and install the outside chimney in the same way.See Pic 8
Note: The two safety vents are positioned on the back casing, with
diameter of 8mm.
Summary of Contents for FAL70GW
Page 1: ...Cooker hood Instruction manual Model No FAL70GW...
Page 9: ...8...
