13
3)
Press any number from 0 - 9 to select the program, the LED will display the
saved time. You can then input the cooking time required.
4)
Press “Hold 0% Defrost 20% Medium 50% or Med-Hi 70%” to input
the power level required.
The LED will display the related power. If the same button is pressed twice,
the power will change to full power. If no power is chosen, full power
“PL10” will the default.
5)
After setting the time and power, press “Start/Confirm”, the cooking
program will be saved and “PROGRAM” will display.
6)
If a cooking time is required that is more than the max time available, Select
option 7, then press “Start/Confirm” to save the program. The buzzer will
sound three times to tell you that the timer is cancelled. The LED will then
show “PROGRAM”
7)
Close the door, the microwave will then return to READY MODE.
Any program that was not saved will be lost. If programs were saved to
their respective numbers as per the procedure above, then once the related
number is selected and the “START” button pressed, then the saved
program will start.
If a number is selected which had no program saved to it, the buzzer will
sound and nothing will happen.
If the “Stop/Reset” button is pressed at any time during the program setting
process, the microwave will return to “DOOR OPEN MODE”.
EXAMPLE
You want to set a memory cooking program to cook on power level Med-Hi
70% for a cooking time of 1 minute and 25 seconds, on program number 3.
STEP 1 – Open the door and press “1” button for 5 seconds, “PROGRAM”
displays.
STEP 2 – Press button “3” to choose number 3, the program will be saved in
program number “3”.
STEP 3 – The preset cooking time will display, select your desired cooking of
1:25.
STEP 4 – Press the “Med-Hi 70%” button to select 70% power mode.
STEP 5 – Press “START” to save. When this program is required, just choose
“3” and press “START”, the program will start.
NOTE: The programmes will be retained if there are electricity cuts.