2.
Fix the bottom chimney section to the extractor with the 2 screws (4 x
8mm).
3.
Slide the chimney sections to adjust the chimney height. Once the
required height is reached, then fix the bracket (plate I) into place with
the 2 x screws provided (4 x 8mm) as shown in the picture below.
4.
Drill 2 x 8mm holes to accommodate the plate II. Screw and tighten
plate II onto the wall with the screws provided.
5.
Assemble the chimney onto the extractor and fix it with 2 screws.
9
Summary of Contents for AR-60-CGS
Page 1: ...INSTALLATION AND USER MANUAL MODELS AR 60 PYRS AR 90 PYRS AR 60 CGS AR 90 CGS...
Page 18: ......
Page 19: ......
Page 20: ......
