2. As per the installation of the domestic hoods on page 6, fit the wall
mounting bracket of the gas braai extractor.
3. To ensure that the extractor is securely fixed to the wall, please affix
the unit using the provided holes at the back of the unit.
These can be accessed by removing all the filters at the bottom of the
unit.
4. Fit the one-way valves to the top of the two air outlets on the extractor
fan, then attached the two ducting pipes on top of the now fitted
one-way valves, as per the picture below:
5. Fit the top chimney section into the lower one by sliding into one
another.
Mark and drill x 4 holes to fix the bracket onto the wall.
This bracket will fix the bottom chimney onto the wall using x 4 wall
plugs and 4 x 30mm screws.
11
