www.fakro.com/service
SERVICE
1. One-sided drooped fabric in
the manual awning blind
– Check correctness of the installation;
X = Y
A
A = B
B
– Check whether the fabric is correctly wrapped -
completely unroll the fabric and then properly
and evenly roll it up;
– Level the fabric on the winding tube and the
lower bar;
– Glue the tape on the side of the winding tube
with drooped fabric
– Repeat the action until completed with success.
2. Locking the bar in the
electric awning blind
– Stop the fabric above the place where the bar is
locked.
– Hold the lower bar of the awning blind with
your hand and then start the awning until the
engine is stopped by the limit switch.
– Roll up the fabric so that the lower bar is slightly
raised.
– Roll down the fabric and check whether the
problem is resolved.
– Repeat this action several times until the fault is
removed.
NC9JB_23.08.17_KB3258
https://youtu.be/cN10bSNA7iU
.
- Instructional video:
5