4/8
3
2
4
5
6
1
Description of the blackout blind
The ARF, ARP Z-Wave blackout blind is intended for mounting onto FAKRO roof windows and has
been adapted for cooperation with wireless control devices offered by FAKRO and other manufacturers
offering products with Z-Wave logo. The blackout blind is equipped with a two-way radio communication
module. For communication, the Z-Wave module utilizes radio wave frequency of 868,42 MHz.
The ARF, ARP Z-Wave blackout blind is equipped with two protections:
• at unfolded blind's material position (overload)
• at folded blind's material position (microswitches)
To be able to operate the blind, it is necessary to install it following the picture installation
instructions included in the product package. Subsequently, the blackout blind should be programmed for
one of the remote controls/controllers (e.g. ZWP remote, ZWK or ZWG keyboard) offered by FAKRO or
any controller offered by other manufacturer equipped with the Z-Wave module. Below there is presented
general view of the ARF, ARP Z-Wave blackout blind with description of available buttons and indicators.
1 – control panel
2 – network status (LED 1 )
3 – programming button P
4 – motor working status (LED 2)
5 – manual operating button
6 – limit switch
Available programming and manual operating buttons (arrow up-down) and signalling are placed
on the left side of the cassette lid.
The ZWF communication modules in the ARF Z-Wave blackout blind are placed inside the blind's
cassette and access to them is possible after removing cassette from the sash.
