7
INTRODUCTION
Thank you for purchasing Fakir Vitrum
Electronic Kitchen Scale which has been
designed and manufactured to give you
many years of trouble-free service. You
may already be familiar with using a similar
product, but do please take time to read
these instructions – they have been written
to ensure you get the very best from your
purchase.
SAFETY IS IMPORTANT
To ensure your safety and the safety of
others, please ensure you read the
instruction manual before you operate this
product. Keep this information in a safe
place for future reference.
ATTENTION
1. Follow the basic safety precautions for all
office equipment when using this scale.
2. The manufacturer does not represent this
unit to be waterproof. Do not expose this
product to rain or moisture.
3. Do not disassemble this scale.The scale
does not contain any parts that can be
repaired by the user.
4. Read all instructions before operating the
scale.
5. Use the scale only for its intended purpose.
6. Please take care that this scale is not
designed for commercial or medical use.
FEATURES
-
Equipped with a high precision ‘strain-
gauge’ sensor and high capability CPU to
ensure the weighing accuracy.
-
Capacity: 5 kg.
-
Weighing and Clock function
-
Tare function
-
Unit: g & oz
-
LCD display 40x20mm / 0.8’
-
Auto - switch off
-
Low - battery indication / Overload indication
KEY FUNCTIONS
-
On/Tare key: Press this key to change to
the weight mode from the clock mode;
press this key to do the tare function on the
weigh mode.
-
Time Key: You can adjust time with this
key.
-
Unit Key: You can choose g & oz.
BEFORE USING
1. Turn over the scale and open the battery
door. Insert the battery to the battery case.
2. Put the scale on a flat table and ensure it
steady.
TIME SETTING
1. Press the “On / Tare” key to enter the weight
mode.
2. When the scale is in the weight mode, press
and hold “Time” key to enter the time setting.
3. Separately press the key of “On/Tare” and
“Unit” to adjust the hour and minute. And
press “Time” return to the weighing mode,
at the same the time setting is finished.
4. Press and hold the key of “On/Tare”, the
scale will come back to the clock function.
WEIGHING MODE
1. In the clock mode press the key of
“On/Tare”, the scale will enter the weighing
mode. The display will show “Hello”, and
then show “0g”.
2. By pressing the key of “Unit”, you can
choose the weight unit: “g” or “oz”.
5
