Fakir VIGOR PLUS, User Manual

Page: 12 / 52

12
EN
Before Use
• Please open Windows for air ventilation before plugging in the unit. Strive to maintain an
environment of fresh indoor air.
• After plugging in, the unit sensor will retain a memory of the existing indoor air condition
(The existing indoor air condition will be input as “Clean Air”).
• Once started, the odor indicator will blink as it memorizes the existing fresh air condition.
After two minutes, the indicator will die off to indicate an end of memorization. Whenever the
unit is unplugged, all memorized content will be erased.
• If the unit is turned on two minutes after plugging in, the odor sensor indicator will not blink.
• When smoke, make up or spray that contains alcohol is present, please ventilate and
freshen the air before closing Windows.
• The unit will not be able to operate effectively if it is plugged while indoor air is polluted.
• Sometimes sensor is not as sensitive when first purchased or after being unplugged for
over a week. Its sensitivity will recover after one or two days of operation.
Operating
Place the device at least 30cm against the wall and where children cannot touch within a
short range of distance.
How to Start
Plug into a proper socket. Press the POWER ON/OFF button. The device starts operating
as the negative ion UV indicator is on. Pres POWER ON/OFF again and the device will stop
working.
Fan Models
This device has five different fan models to choose from. Please choose a proper level of
circulations according to indoor air quality and room size. As your pres FAN, the fan mode
will change according to the number of times you pres the button. The LED will show the
following sequence of modes:
Quiet Low Med Hi AUTO
Automatic Operation
Keep pressing FAN button until the device run under automatic operation (the LED will show
AUTO)
Under automatic operation, the device automatically switches to the proper running modes
(MED or LOW) according to the level of odor, dust or irritants in the air as detected by the
sensor. As the air is purified, the device will automatically switches back to LOW or QUIET
modes.
Automatic Operation