Fakir Viaggio, User Manual

Page: 20 / 56

20
EN
Steam Ironing
Fill the device according to the water filling instructions, then plug it.
Activate the steam sending function by pulling the steam slide in the direction of the
arrow shown below.
After the thermostat warning lamp turns off, steam will be coming from your appliance
according to the thermostat setting you have selected.
You can adjust the steam output density by moving the steam slide forward or backward
without turning it off.
WARNING!
Do not use the steam ironing function in synthetic, silk and nylon type fabrics. Such
fabrics are suitable for non-steam (dry) ironing.
NOTE!:
If you have set the thermostat knob to the MAX position, the steam iron function will
be used more effectively, and at lower setting, water may leak from the base.
Intense Steam Ironing
This function is preferred for stubborn wrinkles and heavy fabrics. You can activate
the intense steam function by pressing the intense steam knob on the handle. Intense
steam sent from the base of the iron ensures that stubborn wrinkles are removed.
Intense steam function can only be used during ironing with high ironing temperature.
For best results, the steam knob should be pressed at an interval of 5 seconds. Do not
push the steam knob more than 5 seconds continuously to prevent water from leaking
from the base.
NOTE!:
If you have set the thermostat knob to the MAX position, the steam iron function will
be used more effectively, and at lower setting, water may leak from the base.
Storage
• Set the steam knob to the off position.
• Unplug the iron from the socket and leave it in an upright position until it cools down