Fakir ULTIMO, User Manual, Page: 28 / 76

28
EN
Attaching and Removing Comb Apparatuses
To style your hair and beard, you can select one of the comb apparatus per its length. The
length between the comb settings is 0,5 mm.
Comb 1 length setting: 0,5 – 10 mm
Comb 2 length setting: 10,5 – 20 mm
We recommend you to select the combs according to the hair length you desire.
Correctly insert the brackets of the comb apparatuses into the slots located near the
appliance’s cutting unit. Ensure that the brackets fit into the slot and lock until you hear the
click sound.
Turn the cutting comb length setting button to right to increase and to left to decrease the
cutting length.
Remove the combs by pulling the brackets upwards.
Hair Clipping and Beard Trimming and Styling with Combs
When you start the operation with your appliance, ensure that you
appliance is fully charged. Use your appliance only with clean and
dry hair/beard. Do not use on new washed hair/beard.
1. Comb your hair towards the hair growing direction.
2. Bring the length setting to maximum if you are using your
appliance for the first time.
3. Turn on your appliance and slowly move the appliance on the
opposite direction of hair grow. Since the hair do not grow on the
same direction completely, you need to move your appliance in
different directions according to the growing direction of your hair.
4. Make sure that the ends of the comb are in contact with your
scalp during hair cutting.
5. You can make overlapping passes on the same area to make
sure that you cut all your hair that you want to cut.