Fakir trend BL 240, User Manual

Page: 43 / 48

Troubleshooting
Fault Possible cause Solution
Appliance does not work. Plug is not inserted or
the appliance is not swit-
ched on.
Insert the plug into a
mains socket and switch
on the appliance.
Power outlet does not
carry any power.
Test the appliance at
another socket which
you are sure carries
current.
Power cord is damaged. Have the power cord re -
placed by an authorised
Fakir service centre.
Vacuum cleaning is
unsatisfactory.
Dust cup is full. Empty dust cup.
Filter is dirty or clogged. Clean or change the
corresponding filter.
Nozzle, telescopic
suction tube or suction
hose are clogged up.
Eliminate clogging. If ne-
cessary, use a wooden
stick (e.g. a broomstick)
to do this.
Suction regulator is
open.
Close suction regulator.
The attached nozzle
does not fit the flooring.
Attach the correct nozz-
le.
The “carpet/hard floor”
switch is in the wrong
position for the particular
type of floor.
Set the “carpet/hard
floor” switch to the cor -
rect position for the type
of floor.
Sucked-in particles have
become jammed.
Remove particles. If
necessary, use a long
wooden stick (e.g. a
broomstick).
43