Fakir T10 series, User Manual, Page: 93 / 276

Recording video clips 21
21.1 General
You can record and save video clips to the memory card.
Note The camera can be configured to save video in *.mpg or *.csq format. Select
( Settings ) > Save options & storage > Video compression .
• Mpeg (*.mpg) : Mpeg recordings cannot be edited after the file has been saved.
• Radiometric storage (*csq) : A *.csq file supports full radiometry but is only supported
by FLIR Systems software. The file does not include any visual image information. With
this setting, only
Thermal image mode is supported when recording video. If any other
image mode is active when Video recording mode is selected, the camera will auto-
switch to Thermal image mode.
21.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to ( Recording mode ).
3. Push the joystick. This displays a submenu.
4. Select ( Video ) and push the joystick.
5. Do the following:
• To start a recording, push and release the Save button. A counter at the top of the
screen displays the duration of the recording.
• To stop a recording, push and release the Save button.
6. The recording is automatically saved to the image archive, where you can play or de-
lete it.
#T559954; r. AL/37426/37426; en-US
79