33
AFTER USE
GB
Please note: When vacuuming extreme fine dust, air
permeability of the filter will be restricted considerably.
Consquence: low suction power, the filter has to be
cleaned or replaced.
Cleaning of motor protection- and permanent fine dust
filter
Please use warm water (max. 40°C) with a mild soap
solution or a washing-up liquid, etc.
The filter has to be dry before using it again.
Clean the appliance only with a dry or moist cloth. You can
also clean the filter compartment (inside the canister) with a
moist cloth, if required.
Check the accessories, such as the hose, tubes and
nozzles, regularly for blockage and clean; wash out, if
necessary, and let dry.
In the event that the appliance does not perform
satisfactorily (reduced suction power, unusual noises or
failure), first check whether the filters are blocked or dirty or
whether there is blockage in the hose or tubes.
Cleaning
WARNING!
Switch off and unplug the vacuum cleaner before
cleaning. This will prevent the appliance from
accidentally being switched on.
ATTENTION!
Do not use cleaning agents, abrasives or alcohol,
since they could damage the housing.
