26
AFTER USE
GB
Troubleshooting
Problems
Room Master does
not work
Reasons
Solutions
Unplugged
Status of sockets
Defective item
Verify the product is securely plugged into
a 220V AC electrical outlet only.
Verify if your in-house sockets, electrical
fuse and leakage protection switch are in
normal status.
If the appliances still does not work, refer
to authorized FAKİR Service.
Verify if the steam nozzle is jamed.
If no, please fill up with water.
If there is no steam, refer to authorized
FAKİR service.
Please replace with a dry cloth.
Replace the cloth if it is too dirty.
Verify if you use steam mop after it have
produced hot steam since turned on for
30-second. Otherwise there will be much
moisture because the steam temperature
is low.
Verify if the cleaning cloth is well attached
in place on the mop head.
Please replace with a new one.
If you washed the cloth with powder
detergent, there may be residual
detergent left on the cloth. Wash it again
with liquid detergent.
If you are going to clean kitchen area
where there might be accumulative
grease, Room Master may not be able to
clean it up at a time. Please use degreas-
ing agent to clean the floor first.
Please use distilled water.
Nozzle is jamed
No water inside water tank
Cleaning cloth is too wet
Dirty microfiber cleaning
cloth
Long usage at one point
Assemblyed wrongly
Dirty microfiber cleaning
cloth
Damaged microfiber
cleaning cloth
Wrong appliance usage
Hardness of water
Room Master does
not steam
Room Master more
water left on floor
after use
Room Master is
hard to push
Floors are cloudy,
streaky or spotty
after steaming
