Fakir Magic Steam VAC, User Manual, Page: 7 / 24

05
• Never fill solvents, solvent-containing liquids or undiluted
acids (e.g. detergents, benzene, paint thinner, and
acetone)
into the water reservoir or the water filter container as
these substances affect the materials used on the appliance.
• Ensure that the machine has cooled down completely
before stowing it away or cleaning it.
• Never leave the appliance unattended as long as it is
in operation.
• Turn off the appliance and remove the mains plug
prior to any care and maintenance works.
• To avoid risks, all repairs and replacement of spare
parts in the machine may only be carried out by the
authorised FAKIR service personnel.
• Always use original spare parts and accessories
permitted by the manufacturer so that the safety of the
machine remains intact.
• Caution: Never operate or store the
appliance in a horizontal position!
• Protect the unit from rain. Do not store
outside.
Steam
CAUTION - Danger of scalding
Symbols on the machine
When you unpack the system, check that everything is
complete (see page 3). If there are any missing parts or
you detect any transport damage when unpacking,
please inform your dealer immediately.
Unpacking the appliance
The terms of the guarantee applicable in each country
have been published by our respective national
distributors. We will repair possible faults on your unit
free of charge within the warranty period, insofar as the
faults are caused by material defects or defective
workmanship. Guarantee claims should be addressed
to your dealer or the nearest FAKIR customer service
centre, and supported by documentary evidence of
purchase.
Warranty
Preparing the appliance
• Open the filling nozzle (7) of the water tank (Fig. 1).
• Fill approx. 0.5 litre water into the water tank. You
can use the measuring cup (Fig. K).
Note: You can use normal tap water. As water
naturally contains calcium that can lead to the formation
of deposits in the boiler, we recommend the use of a
mixture consisting of 50% tap water and 50% distilled
water.
• Close the filling nozzle of the water reservoir (7).
Note:
Water is automatically supplied from the water
reservoir to the steam boiler. The water reservoir must
be filled up twice before commissioning the machine for
the first time.
Filling the water reservoir
Filling the water filter container
• Lift the handle (18) of the water filter container (Fig.
2) and remove the water filter container (17) (Fig. 3).
• Turn the handle (18) of the water filter container and
remove the water filter inlay (19) (Fig. 4).
• Fill the water filter container (17) with tap water till the
water level marking MAX H2O is covered (Fig. 5).
• Add a cap full of foam stop to the water filter container.
Note:
The functioning of the vacuum cleaner is based
on the whirling of the suction air in the water filter. In the
process, sucked-in materials and deposits of cleaning
agents from floors get collected in the water bath. This
can sometimes lead to the formation of foam. It is
necessary to add the foam stop liquid to the water filter
bath to avoid this situation. The foam stop liquid is
environment friendly and fully bio-degradable. Slight
foam formation is normal and does not hamper the
functioning of the machine.
• Insert the water filter inlay (19) back into the water
container (17).
The packaging material can be recycled.
Please do not place the packaging into the
ordinary refuse for disposal, but arrange
for the proper recycling.
Old appliances contain valuable materials
that can be recycled. Please arrange for the
proper recycling of old appliances. Please
dispose of your old appliances using
appropriate collection systems.
Environmental protection
Maintenance
Storage
Usage life: 10 years