HT 2000
EN
16
WARNING!
The heater will remain hot for some time after it is
turned off. Please handle with care.
Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
When plugged in, turn on the Main power switch (1) at the rear of the upper of the
heater , then you can use as following:
1) Used to turn on/off the device in standby mode LED-display Displays the value of
the set temperature and/or time of the timer
2) Time: Used to select the mode of timer set
3) Used to set the desired temperature value
4
）
Timer: The timer function allow you to see the length of operation for up to 9 hours.
5) Mode: Used to select the heating power or ventilation mode without heating
6) OSC:Used to set the oscillation function
1- On/Off Switch
Decrease
Temperature
on-off
stand by
Temperature
display
Power
Display
Fahrenheit
Timer
Oscillation
Increased Temperature
Low Power
High Power
Fan Only
Timer
icon
2- Kontrol Panel
3- Metal mesh for Air-outlet
4- Base board