FRANKY
GB
35
Following the reverse sequence of operations when removing the dust canister, insert
the dust canister into the main body and turn it in the opposite direction of the
indicated ARROW and lock it in the body.
Removing, cleaning and installing the HEPA filter;
To open the front lid, press the HEPA filter lid on/off button as shown in the picture
below. Remove the cylinder HEPA filter from its compartment by holding the handle.
You can clean the filter by shaking it or gently brushing it with a soft hairy dry brush.
The cylinder HEPA filter is a washable filter. You can wash your filter for once only.
After shaking the HEPA filter’s dust, rinse it by keeping it under running cold or warm
water and let it stand at room temperature until it is completely dry (at least 24 hours).
Make sure the HEPA and the canister is dry before the next use.
NOTE!
If the dust canister fills and the filter is blocked the
vacuum power of your device will drop. Emptying and
cleaning the dust canister after each use will extend the
life span of your device.
Dust canister release button
HEPA filter lid on/off button
Cylinder sponge filter
