30
AFTER USE
GB
Before you contact our Fakir Customer Service, check
whether you can correct the fault yourself.
Troubleshooting
Multifunction
Appliance does not
work
Appliance does not
suck up any dirt
Appliance is making
unusually loud
noises while running
Possible Cause
Solutions
Plug is not plugged in or
the appliance is not
switched on.
Socket does not carry any
current.
Power cable is damaged.
Dust container is full or
blocked.
Selected brush/nozzle are
incorrect for the type of
flooring.
Filter is dirty.
Nozzle, telescopic tube or
suction hose are blocked.
Sucked-in particles are
blocking the air-way.
Plug in the plug or switch the
appliance on
Test the cylinder vacuum
cleaner at another socket which
you are sure carries curreent
Have the cable replaced by
authorized Fakir services
Empty/clean dust container.
Adjust your brush/nozzle
selection to the type of flooring.
Clean the corresponding filter.
Remove the blockage. If
necessary, use along wooden
rod for this (e.g.a broom handle).
Remove the particles. If
necessary, use a long wooden
rod for this (e. g. a broom
handle).
