NOTE!
You may hear occasional clicking sounds during operation. This is normal and
due to water topping.
AIRWELL
GB
20
Cleaning and Maintenance
Keeping the Appliance Clean
Always use fresh water.
Clean the base, water tank and steam output of the appliance every week.
If you are not going to use the appliance for at least two days, drain the water tank and
the base, clean with a cloth and sponge. Leave the water tank open in order to dry it
completely. This will prevent moss generation.
Cleaning
Unplug the device and switch the power button to “off” position.
Do not submerse the base, electric cable, the plug in water or other liquids.
Do not use metal or hard materials to clean the steam outlet. Clean the dirty surface
with a brush or a soft cloth until the residue is removed. Clean with fresh water. Do not
use detergent.
You can wash the water tank and tank cap under running hot water of clean the interior
of the water tank by filling it with water and tightly close the lid and shake.
Clean the device base unit with a soft brush or clean with a damp cloth.
Rinse with fresh water.
Humidity Adjustment
By pressing the button next to icon to adjust the level of humidity. It can be adjusted
by + or - buttons via the controls. This mode has 3 levels, if left unchanged, it will
operate at level 2. Every time this button is pressed, a level is added (P2, P3, P1,
P2...), you can select the desired level. By using the steam outlet cap, the steam output
may be directed as desired.
If the water level is low, the light will flash on the display accompanied with a warning
sound. In this case water shall be added, otherwise the device will stop operating.
To turn the appliance off, press the button and switch the power button to “0”, then
unplug the appliance.
NOTE!
When the appliance is operated, press button and the lights will turn off in sleep
mode. In this mode the humidity adjustment button ( ) cannot be used but the timer
button ( ) may be used.