Fakir A 120 ELECTRONIC, Instruction Manual, Page: 10 / 10

Cleaning your vacuum cleaner
Clean the housing of the vacuum cleaner
with a soft and humid cloth and let dry.
Troubleshooting
Your vacuum cleaner will not start or does
not vacuum;
•
The appliance is not connected: check that
the appliance is correctly plugged in.
•
Either a tool or the tube is blocked: unblock
the tool or the tube.
•
The lid was not closed properly: check that
the bag is properly installed and close the
lid again.
Your vacuum cleaner’s suction power is
defective, noisy, whistles.
•
A tool or the hose is partially blocked:
unblock the tool or the tube.
•
The dustbag is full or blocked with fine
dusts: replace the dustbag.
•
A foam filter and/or the micro-active filter
are saturated: clean the foam filters and
replace the micro-active filter.
•
The power control* is in the min. position:
increase power using the power control*
(except when vacuuming delicate fabrics).
•
The nozzle is difficult to remove: reduce its
power with the cursor of the power control.*
The dustbag full indicator* remains lit;
•
The bag is full: replace the bag.
*According to the model
10