FTG Series Programming Manual
_________________________________________________________________
１５
Returned parameter: <NR1>
Related commands: *ESE *ESR
*PSC
*STB?
Query Status Byte register. The Status Byte Register bits are cleared when it is read.
Command syntax: *STB?
Parameter: None
Returned parameter: <NR1>
Related commands:
*CLS *ESE *ESR
*SAV
This command stores the current instrument state in the specified storage location. Any
state previously stored in the same location is overwritten without generating any errors.
The PSU has 20 storage locations in non-volatile memory which are available to the user for
storing PSU states. (location 1 ~ 20)
Command syntax: *SAV <NR1>
Parameter: 1
～
20
Usage example: *SAV 3
Query syntax: None
Related commands: *RCL
◎
Caution:
*SAV command takes an excution time of 500ms, do not operate the instrument while
implementing this command.
*RCL
This command recalls the PSU state stored in the specified storage location. The PSU has 20
storage locations in non-volatile memory to store PSU states. It is not possible to recall the
PSU state from a storage location that is empty or was deleted.
Command syntax: *RCL <NR1>
Parameter: 1
～
20
