Specifications
Code
LED type
Input voltage
Rated power
Extended height
Closed height
Extended width
Extended depth
Lumens
Colour temperature
Light angle
LED lifetime
N.W.
Waterproof class
Maximum power
outlet load
Maximum lamp
linking
FPP SLLED36UL
336 x LED (SMD2835)
AC 110V ~ 50Hz
36W
1285mm
1180mm
850mm
740mm
3000LM
6400K
360deg
50000 hours
3.6kg
IP44
1760W
20
FPP SLLED36U
336 x LED (SMD2835)
AC 240V ~ 50Hz
36W
1285mm
1180mm
850mm
740mm
3000LM
6400K
360deg
50000 hours
3.6kg
IP44
3100W
30
Instructions for use
Parts included
1) Threaded round hole strap retaining clip
2) Adjustable nylon carrying strap
Setting up
The LED Light Pole is supplied with a
removable adjustable carrying strap.
Screw the strap retaining clip in to the
threaded inset in the head of the lamp.
The carry strap can then be clipped
through the locating hole in the clip and
then attached to the fixed clip on the
base of the lamp.
The tripod stand fitted to the Light Pole
is fully adjustable and allows the legs to
be deployed to the required position and
locked in place. To adjust the tripod
slacken the thumbscrew on the sliding
collar and then apply downward
pressure to force the collar down
opening the tripod legs. Maximum
stability is achieved when the sliding
collar is fully down and in contact with
the base of the lamp. After use the
tripod can be fully retracted by pulling
the sliding collar upwards and locked in
a closed position for easy transportation.
The LED Light Pole also features a
power outlet the can be used to link
several lamps together or as convenient
power source for use with a power tool.
Please note the total load applied
should not exceed the following:
FPPSLLED36U 240V
Maximum power outlet load
3100
w
FPPSLLED36UL 110V
Maximum power outlet load
1760
w.
General Safety Rules
1. Always check that the voltage
displayed on the nameplate is the
same as the mains power source.
2. Never use an electrical appliance in
the rain, in wet areas or with wet
hands, using electrical appliance
under these conditions greatly
increases the possibility of electric
shock.
3. Prior to operation, carefully inspect
the light for any damage. Any part
that is damaged, including the
casing, cable or plug, should be
properly and safely repaired or
replaced by a qualified electrician
before the light is used.
4. Please ensure that you read these
instructions before using the LED
Light Pole, and that all the safety
guidelines are understood. Please
keep these instructions for future
reference.
5. Ensure the cable is positioned to
avoid presenting a trip hazard.
6. Do not exceed the rated power
loading for each type of lamp.
Please note:
When using a 240v
electrical appliance (particularly
outdoors), we recommend the use of
a residual current device (RCD) such
as the Faithfull model, product code
FPP RCD
, or a power circuit breaker,
for enhanced protection.
Product Introduction
The 360° LED Light Pole is a portable 36 watt LED lighting unit designed for use on
the worksite, in the workshop, garage or home, and is available in either 240v or 110v
versions for use in industrial applications.
