●
Wet the bristles and apply an appropriate amount of toothpaste onto the brush.
●
Place the bristles with toothpaste against the teeth at a slight angle towards the gum line.
●
Gently move the brush head across the teeth on the front, back, and all chewing
surfaces. The brush should be allowed to glide across the teeth with minimal pressure.
Do not apply too much pressure to the teeth/gums, or apply the bristles to one area of
the mouth for an extended period of time.
●
The brush has a 2 minute smart timer as this is recommended by dentists as the optimal
time for brushing the teeth and there is interval pausing after every 30 seconds as a
reminder to move to another quadrant of the mouth.
●
Move to the next section when you feel the pause and the toothbrush will automatically
power off after 2 minutes.
●
To avoid splashing toothpaste, only turn on the toothbrush after you have placed it
against your teeth and only remove it from the mouth after it is turned off.
☆
Changing the toothbrush head
●
Install: Slide the toothbrush head down toward the handle. Please make sure it is in the
correct position.
●
Detach: Firmly hold the base then, pull the toothbrush head out away from the handle.
☆
Charging the toothbrush
●
If the toothbrush is in low battery condition when turning it on for the first time, please
ensure it is fully charged before usage.
●
If the toothbrush is not in use for more than 3 months, please fully charge it according to
the charging instructions before using it.
●
If the indicator light flashes quickly during the operation process, it indicates the
toothbrush is in a low battery condition, please charge the toothbrush as soon as
possible.
●
When you are going to charge your toothbrush, please insert the USB cable into the
charging port in the bottom of the toothbrush and ensure the brush is connected to the
electric power safely.
●
The charging indicator light will be white and flashes slowly during the charging process.
When the battery is fully charged, the indicator will turn on for two minutes and not flash
anymore, after 2 minutes, it will turn off automatically. After the toothbrush is fully
charged, it is possible to use it for two minutes per session, twice a day for
25
days .
●
There is a waterproof function built into the toothbrush, so it can be used in the bathroom
safely.
☆
Modes Introduction
●
The first mode: White
In this mode, the white indicator light turns on in the “White” mode position, the swing of the
brush is large and the vibration intensity is the strongest. It is suitable for users who have high
requirements for cleaning effect and do not have sensitive teeth.
●
The second mode: Clean
In this mode, the white indicator light turns on in the “Clean” mode position, the swing of the
