STEP 4 – Cut Rails and Pre-Drill Posts
NOTE: Never cut material on deck surfaces. To prevent rust stains, remove all metal shavings from the cut area;
including the deck, post base cover, post and panel.
•
Cut the rails at all marks, parallel to the end of the rail.
•
Deburr cut edges and coat with two (2) coats of zinc-based touch-up paint (item #306090).
•
Pre-drill bracket hole locations on posts using 3/16” drill bit.
•
Remove hinge pin from stair bracket assemblies.
•
Attach all bracket plates to post using provided T-25 screws.
•
Slide brackets onto the end of the rails.
STEP 5 – Install Rail Panel and Secure Brackets
•
Set panel in place using support blocks from previous step.
•
Line up brackets with bracket plate and replace hinge pin.
•
Check fit of panel and adjust as necessary.
•
Pre-drill using 3/16” drill bit at rail screw location on side of bracket.
•
Install Provided T-25 screw.
©2018 FAIRWAY ARCHITECTURAL RAILING SOLUTIONS.
