14
4 Retaining Screws
4 Retaining Screws
Engine front Facia
2.2 E
LECTRICAL
I
NSTALLATION
The Engine is designed to run from a single phase power source with one of its current
carrying conductors at or near ground earth ground potential ( the neutral conductor). Only
the line (live) conductor is fused for over-current protection. Systems that have both current
carrying conductors live with respect to ground , such as phase-to-phase in multi-phase
systems are not recommended as power sources.
It is recommended that both the Engine and Console are connected to the same electrical
supply or ring main which ideally should be regulated and smoothed. If the power source is
likely to be unexpectedly cut then both the units should be fed from a backed up power source
such as a UPS.
For Power Requirements, see Appendix A21 at the back of this Manual.
Mains connections should be fitted with the appropriate type of plug. See Section
“Mains
Plugs & Power Cords”
at the front of this Manual.
