The time clock and timers are on the left button, altimeter and barometer
references are on the right and various other functions are on the middle
button. After displaying a function, for example temperature or altimeter
type, that function will be remembered when you return to the button.
After checking the time, the menu will automatically return to the
previous function without having to press it again, and after selecting
the averager it will return to the current altimeter after a few seconds.
If you press either of these functions a second time it will stay on that
function, the vario will then be displayed above the time and altitude
below the averager.
The middle button gives access to 3 sub menus when SUB is displayed:
The left submenu
shows maximum readings for altitude, humidity etc.
The right sub menu
allows you to adjust regular user settings.
The middle sub menu
is accessible with a long press on SUB and gives
access to less used settings, tests, serial number etc. Remember to use
EXIT to leave any of the sub menus.
The Micro Alti is shipped in DEMO mode to let you see how it responds,
but it may be too sensitive for general flying so we would recommend
selecting DEFS (flying defaults) in the middle SUB menu and press the
right button to make the change. You can also customise your settings
in the right SUB menu.
