Using buttons
Speed-/Speed+
you set the desired work speed of the extracotr ( from 10% to 100%). When
you are finished with setting the time and speed of the extractor, by pressing button
Start
, you start the
extractor, and set work time is shown on the screen, begining to count down from the set value to zero.
Direction of spinning of the extractor can be changed by pressing button
Direction,
but only when the extractor comes to a full stop.
If you want to save the set work time and speed, you can do that by pressing button
Memory
.
Pressing the button
Stop
, you stop the extractor.
