background image

EN

User Manual

CLEANING

Clean the tip regularly with the sponge, as the oxides and carbides created 

when soldering may cause contamination which may reduce the heat 

conduction of the tip or cause damage to it. It is recommended to clean 

all oxides from the tip once every week. This helps to ensure damage 

prevention and temperature reduction on the end of the tip. Never leave 

the tip under high temperatures for a long time as it will be covered with 

oxides and reduces the lifetime of the tip. 

AFTER USE

Wipe the tip with a wet sponge and lubricate with a solder conductive 

additive which will help to protect the device against oxidation. 

Note

:

The soldering station will turn into sleep mode after it is not in used within 

15 mins when the tip will cool down to 200°C. If you move the tip again, 

it will heat up again to the previously set temperature. This function 

significantly increases the longevity of the tip and the heating parts of the 

station.

CHECKING AND CLEANING THE TIP

Set the temperature to appr. 250°C. When the temperature stabilizes, clean 

the tip with a wet sponge and check its state. If it is deformed or heavily 

corroded, replace it to a genuine FAHRENHEIT tip. Do not rub the oxidewth 

any abrasive material because it can damage the special cover of the tip. 

SPECIFICATIONS

Main voltage

230V, 50Hz

Soldering tip

24V, 50Hz

Temperature display

2 x 3 digit LCD

Display accuracy

5%

Fuse

50x20mm/250V

Temperature setting

160°C-480°C

Weight

approx. 1900 g

Summary of Contents for 28013

















Reviews: