background image

LIMITED WARRANTY

The products covered by this installation manual, manufactured and/or sold by Marley Engineered Products, are warranted against 

defects in workmanship and materials for one year from date of purchase. This warranty does not apply to damage from accident, 
misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly 
installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied 
by proof of the date of purchase.
 
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping 
costs incurred to return products to Marley Engineered Products Returned Goods Department. Within the limitations of this warranty, 
inoperative units should be returned to 470 Beauty Spot Road, Bennettsville, SC 29512, with a complete description of the problem, 
proof of purchase documents, and customer’s full name and address. Merchandise returned to the factory must also be accompanied 
by a Material Return Authorization (MRA) a available from Marley Engineered Products. For  warranty questions and assistance in 
obtaining the MRA documents required for return of the product, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-
4328.

When requesting the MRA, include Model numbers and date code as shown on the product’s nameplate. In warranty returns will be 
repaired or replaced, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is 
the exclusive remedy available from Marley Engineered Products.
 
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID 
EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED 
PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER 
BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may 
not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

HOW TO OBTAIN WARRANTY SERVICE AND 
WARRANTY PARTS PLUS GENERAL INFORMATION

 

1. Warranty Service or Parts 

1-800-642-4328

 

2. Purchase Replacement Parts 

1-800-654-3545

 

3. General Product Information 

www.marleymep.com

Note: When obtaining service always have the following:

 

1. Model number of the product

 

2. Date of manufacture

 

3. Part number or description

8

470 Beauty Spot Rd. East
Bennettsville, SC  29512 USA

Summary of Contents for FLCH4R









Reviews: