FagronLab UVGI-80, User Manual

Page: 6 / 8

FagronLab™ UVGI-80 – User Manual | 6
Error Troubleshooting
Work indicator is not lit
Check the connection of power
Check the fuse condition
UV light is not working
Check Ballast working condition 2A (Ф5×20)
UVC lamp is damaged
Fan is not working
Check the fan motor
Check the fan power connection
10. Trouble Shooting
11. Maintenance
12. Warranty
• UV life-time is 5000hours. Please replace the UV lamp in time according to your personal disinfection plan
• To store the device, unplug from power and cover with a clean cloth
This device is under warranty and free from defects in materials and workmanship, under normal use and service, for a
period of 12 months from the date of invoice (excluding consumable accessories). The warranty is extended only to the
original purchaser. Warranty is not valid on device which has been damaged on account of improper installation, improper
connections, misuse, accident or abnormal conditions of operation. If the warranty has been expired, Fagron would still
responsible for repair with relative charges.
For claims under the warranty please contact your local supplier.
FagronLab™ UVGI-80
• Please unplug the device from the power and contact your local supplier, when the following occurs:
A When the power cord or plug is damaged or worn
B If liquid is spilled into the unit
C If the sterilizer is being exposed to rain or water
D If the sterilizer is broken or the frame is damaged
E If the sterilizer changes significantly in performance
• The service life of the whole device is five years. If used for more than five years, the aging of components and power
cords may cause personal safety accidents. A complete Service must be done after this period.
• Ultraviolet germicidal lamps should be used to detect the irradiance according to the time of use, and the irradiance of
the radiation is <70uW/cm2 (power ≥30W). The UV germicidal lamp should be replaced regularly (lifetime more than
5000 hours)